Home » News » Company News » Asphalt Crack Sealing Tape

Asphalt Crack Sealing Tape

Views: 10     Author: Site Editor     Publish Time: 2022-03-23      Origin: Site

Asphalt Crack Sealing Tape

Product introduction

Asphalt Crack Sealing Tape is a kind of stress-absorbing interlayer composite polymer material for asphalt road, which can effectively absorb stress and block moisture. It is a strip-shaped, self-adhesive interlayer crack-proof and waterproof material which is made of asphalt-based polymer, tire base, high-strength and high-temperature resistant fabric, isolation membrane and other layers through precise extrusion and compounding of special machinery and equipment in the factory.

抗裂贴 (24)

Commonly described as: Asphalt Crack Sealing Tape, Asphalt Joint Sealing Tape, Asphalt Repair Tape, Pavement Crack Sealing, Crack Sealing Tape, Asphalt Crack Repair Tape, Asphalt Crack Sealer, Bituminous Joint Sealant, Asphalt Pavement Sealer, Quick Joint Sealing Tape.

抗裂贴 (8)


  1. Reinforcement function The high-strength and high-temperature resistant fabric on the surface of the asphalt anti-crack paste has a large tensile strength, which can effectively resist the tensile stress at the cracks between the layers, limit the development of the crack width, and play the role of reinforcement, which improves the anti-fracture of the local structural layer of the asphalt pavement. tensile strength.

  2. Energy dissipation and buffering function The polymer in the asphalt anti-crack paste is a material with a certain viscoelasticity and good low temperature flexibility. When it is laid between the asphalt pavement layers, the tensile stress at the crack will expand through the good viscoelastic composite layer and gradually attenuate to a wider range. range, can play a role in absorbing stretching energy.

  3. Waterproof and anti-seepage function Asphalt anti-crack stickers are laid on the surface of the cracks between layers to form a complete waterproof and anti-seepage layer to cut off the infiltration path of rain, snow and water, thereby reducing water damage to the road surface.

  4. Self-adhesive properties The product is self-adhesive, and the construction is very convenient. After removing the isolation film, it is directly bonded to the cracked part, and the bond with the road surface is firmer without shifting.


Performance parameters of Asphalt Crack Repair Tape


How to install the Asphalt Crack Sealing Tape

抗裂贴 (18)

  1. Surface treatment

    (1) The dust and water on the adhering surface must be removed to keep the road surface dry and clean.

    (2) Cracks with a width of 5-19mm must be cleaned up and filled with sealant.

    (3) Cracks and subsidence areas with a width of 19-50mm must be cleaned up, filled with mortar, sealant or asphalt mixture and compacted to the existing height.

    (4) Cracks or pits with a width of more than 50mm must be cleaned up first, and then filled with mortar or hot asphalt mixture and compacted to the existing height.

    (5) For cracks and subsidence areas with different heights, leveling treatment must be carried out.

    (6) The protrusions on the bridge deck and road surface must be cleaned or treated to be level.

  2. Environmental conditions

    (1)It should be used under the condition that the surface temperature is not less than 10℃.

    (2) If there is overlap during the laying process, the overlap length is 50mm.There cannot be more than two layers of overlap.

    (3) It is recommended to roll 2-3 times with a rubber wheel roller after laying the polymer asphalt anti-crack sticker.

    (4) Vehicles can pass after the laying is completed, but the interval from the laying of the upper layer should not exceed 24 hours.

  3. Asphalt overlay

    (1) After the asphalt anti-crack sticker is correctly laid, it should be closely combined with the construction of the upper layer to avoid moisture and rain.

    (2) After laying the asphalt anti-crack stickers, you can spread sticky oil such as emulsified asphalt according to the construction specifications of the hot asphalt mixture.

    Fine-grained crushed stone or mix.

    (3) The thickness of the hot asphalt mixture on the asphalt anti-crack sticker should be greater than 30mm.





Office address: 16F Shengdi Building, No. 6 Great Wall Road, Taian City, Shandong, China 271000
Shandong Lianxiang Engineering Materials Co.Ltd